UV-Products


UV Transilluminators



Product Description

Herolab Transilluminators are available in more than 100 different versions

 – there is the right one for everybody!
  • Homogenous illumination of samples through special reflectors of refinded aluminum
  •  Effective use of the high intensitiy of the tubes
  • Herolab LongLife® Electronics: Low heat generation, quick start without flickering, long service life
  • Stainless steel filter frame, powder-coated housing, counter-sunk switches
High Contrast (HC) – The new level of UV Transillumination
  • Contrast reinforced by improved filter characteristics
  • Improved results with all fluorophores, e.g. SYBR™ stained or ethidium bromide
  • Intensity switch 100 % - 75 % (not included on model UVT-14/22)
  • Removable adjustable UV protection shield (for Economy models available against at extra cost)
Standard Class – Units with White Light
  • Standard filter plate
  • Intensity switch 100 % - 75 % (not included on models UVT-14/22)
  • Removable adjustable UV protection shield included
Economy Class – Robust and Good Value
  • Robust steel housing
  • Removable adjustable UV protection shield is available as an option.
Advanced Class – Multiwave
  • Standard filter plate
  • Duo with two UV wavelengths / Tri three UV wavelengths in one unit
  • Every combination of UV wavelength is possible
  • With intensity switch 100 % - 75 % (for Duo units only)
  • With infinitely variable electronic intensity control
  • Removable adjustable UV protection shield included
  • Blue light
NON-UV : LED- Blue light transilluminator
  • No risk of UV radiation damage of DNA or cells
  • Not dangerous for the user
  • Orange glasses and plate available as optional accessories
Specification








PCR - Workstations

Safe and efficient working with PCR®-samples

The PCR®-Workstations CleneCab® and CleneCab plus® are low-cost alternatives to a cleanroom in order to prevent contamination when working with the PCR®-samples. UV light is providing decontamination.
  • Clene Cab (cat. no. 30 00 100) comes with 4 UV tubes, 254 nm of 15 W each. The timer for UV light can be set up to 120 minutes.
  • CleneCab plus (cat. no. 30 00 200) is a combination of a Crosslinker and a PCR Workstation. The energy for radiation can be chosen. This workstation has 5 UV tubes, 254 nm of 15 W each. It is indicated when tubes must be exchanged.

CleneCab



Product Description

Safe and efficient workspace for PCR® work

  • Inactivates nucleic acids in as little as 5 to 30 minutes
  • Protects the sample from external contamination and the user from biohazardous samples
  • Doors with safety cut-off switches, in order to protect the user from UV radiation
  • 4 powerful, timer controlled UV tubes, 254 nm and 15 W each combined with special reflectors for efficient irradiation of the entire work surface
  • White light illumination for routine work
  • Very easy to clean
Specification





CleneCab plus




Product Description

PCR Workstation and Crosslinker in one system

  • Inactivates nucleic acids in as little as 5 to 30 minutes
  • Protects the sample from external contamination and the user from biohazardous samples
  • Doors with safety cut-off switches, in order to protect the user from UV radiation
  • 5 powerful, timer controlled UV tubes, 254 nm and 15 W each combined with special reflectors for efficient irradiation of the entire work surface
  • White light tubes, 2 x 4 W
  • Removable Crosslinker - Inset (40 x 22 cm)
  • Built-in microprocessor for controlling the UV energy (for crosslinking)




UV Crosslinker




Product Description

Microprocessor controlled UV irradiation system


  • Easy handling: Only two switches: one for Intensity and one for Start
  • Automatic safety cut-off of UV radiation when tray is opened
  • Low need of repairs because sensor is protected from mechanical defects
  • Setting of energy (J/cm²) or time (s)
  • High lifespan due to durable sensor
  • High reproducibility due to microprocessor control
  • Pull-out tray and housing made of stainless steel
  • Large-size tinted and UV tight front panel
  • Available in 3 wave lengths (254, 312 (302) and 365 nm)

The new Crosslinker CL-1, developed by Herolab, has a unique method for measuring the UV radiation. For the exact determination of the emitted UV radiation during the measurement the built in processor also detects and measures the emitted white light. By monitoring the white light any aging of the detector caused by the UV radiation is therefore excluded.

The Crosslinker can be used for the rapid and reproducible fixing of nucleic acids to membranes using UV light with a wavelength of 254 nm. (Other wavelengths are available on request). The hybridization signal is 5 to 10 times higher compared to conventional methods using the UV Crosslinking application (e.g. baking).




 
 
 
 
PT. SPEKTRA SURYA UTAMA
 
2