Dissolution Systems USP I & II (Automatic)


LOGAN SYSTEM 850BDL Automated Dissolution Sampling Systems




Features
  • Control 1 or 2 baths up to 20 sampling time points
  • Stand alone controller, not subject to 21 CFR 11
  • Syringe pump sampling system accuracy to 1%
  • Full sample recycling with no waste
  • Printer for full report
The Logan System 850BDL Automated Dissolution Sampling System is a modularly designed system for auto mated dissolution sampling. The integral UDT-814 Dissolution Tester can be configured with a drive system co mprising six, seven or eight sampling vessels and spindles. It is used for dissolution testing of a variety of phar maceutical products including tablets, capsules, and transdermal patches. The UDT-814 can be used in severa l configurations that satisfy USP criteria, e.g. rotating baskets (USP I) or paddles (USP II), paddles over disk (U SP V) or rotating cylinders for transdermal applications (USP VI). The UDT-814 is supplied with a built-in heate r/circulator. The heater can be controlled locally by the UDT-814.

The Tablet Dropping Tray accessory automates the process of tablet dropping. It drops the tablets simultaneously, thereby marking the beginning of each test with far greater precision than manual techniques allow. This feature ensures compliance with regulatory requirements. Temperature readings can be taken before, after, and periodically during a run to ensure compliance throughout the test. The automated sampling manifold can be controlled to lower the probes into the vessels. The samples may also be filtered through a membrane or other filters. At each sampling point, the syringe pump takes samples from the vessels and flushes out the sampling lines. After flushing the line, the samples return to the same vessels. This system does not send any sample to waste. The time, speed and temperature will be recorded at the beginning of each test as well as when samples are being taken.

The SYP-8L Syringe Pump module is built-in with the DSC-800 System Controller, which saves lab bench space. The SYP-8L withdraws samples to rinse the line right before each time interval, individual samples are dispensed simultaneously into collection tubes or vials in the SCR-160L Sample Collector. After collecting the samples, SYP-8L does the media replacement, back flushes the filters, and purges all the sampling lines. The DSC-800D System Controller permits quick and easy programming of all parameters and gives the user total flexibility in the use of up to 2 systems simultaneously. Each system can be programmed to control all dissolution parameters, all test method are printed by provided printer.

Specification :









LOGAN SYSTEM 850BDL-12 Automated Dissolution Sampling Systems




Features
  • Control 1 or 2 baths up to 20 sampling time points
  • Stand alone controller, not subject to 21 CFR 11
  • Syringe pump sampling system accuracy to 1%
  • Full sample recycling with no waste
  • Printer for full report
The Logan System 850BDL Automated Dissolution Sampling System is a modularly designed system for auto mated dissolution sampling. The integral UDT-814 Dissolution Tester can be configured with a drive system co mprising six, seven or eight sampling vessels and spindles. It is used for dissolution testing of a variety of phar maceutical products including tablets, capsules, and transdermal patches. The UDT-814 can be used in severa l configurations that satisfy USP criteria, e.g. rotating baskets (USP I) or paddles (USP II), paddles over disk (U SP V) or rotating cylinders for transdermal applications (USP VI). The UDT-814 is supplied with a built-in heate r/circulator. The heater can be controlled locally by the UDT-814.

The Tablet Dropping Tray accessory automates the process of tablet dropping. It drops the tablets simultaneously, thereby marking the beginning of each test with far greater precision than manual techniques allow. This feature ensures compliance with regulatory requirements. Temperature readings can be taken before, after, and periodically during a run to ensure compliance throughout the test. The automated sampling manifold can be controlled to lower the probes into the vessels. The samples may also be filtered through a membrane or other filters. At each sampling point, the syringe pump takes samples from the vessels and flushes out the sampling lines. After flushing the line, the samples return to the same vessels. This system does not send any sample to waste. The time, speed and temperature will be recorded at the beginning of each test as well as when samples are being taken.

The SYP-8L Syringe Pump module is built-in with the DSC-800 System Controller, which saves lab bench space. The SYP-8L withdraws samples to rinse the line right before each time interval, individual samples are dispensed simultaneously into collection tubes or vials in the SCR-160L Sample Collector. After collecting the samples, SYP-8L does the media replacement, back flushes the filters, and purges all the sampling lines. The DSC-800D System Controller permits quick and easy programming of all parameters and gives the user total flexibility in the use of up to 2 systems simultaneously. Each system can be programmed to control all dissolution parameters, all test method are printed by provided printer.


Specification :







LOGAN SYSTEM 860BDL-12 Automated Dissolution Sampling Systems




Features
  • Control 1 or 2 baths up to 20 sampling time points
  • Stand alone controller, not subject to 21 CFR 11
  • Syringe pump sampling system accuracy to 1%
  • Full sample recycling with no waste
  • Printer for full report

The Logan System 860BDL Automated Dissolution Sampling System is a modularly designed system for auto mated dissolution sampling. The integral UDT-814 Dissolution Tester can be configured with a drive system comprising six, seven or eight sampling vessels and spindles. It is used for dissolution testing of a variety of pharmaceutical products including tablets, capsules, and transdermal patches. The UDT-814 can be used in several configurations that satisfy USP criteria, e.g. rotating baskets (USP I) or paddles (USP II), paddles over disk (U SP V) or rotating cylinders for transdermal applications (USP VI). The UDT-814 is supplied with a built-in heate r/circulator. The heater can be controlled locally by the UDT-814.

The Tablet Dropping Tray accessory automates the process of tablet dropping. It drops the tablets simultaneously, thereby marking the beginning of each test with far greater precision than manual techniques allow. This feature ensures compliance with regulatory requirements. Temperature readings can be taken before, after, and periodically during a run to ensure compliance throughout the test. The automated sampling manifold can be controlled to lower the probes into the vessels. The samples may also be filtered through a membrane or other filters. At each sampling point, the syringe pump takes samples from the vessels and flushes out the sampling lines. After flushing the line, the samples return to the same vessels. This system does not send any sample to waste. The time, speed and temperature will be recorded at the beginning of each test as well as when samples are being taken.

The SYP-8L Syringe Pump module is built-in with the DSC-800 System Controller, which saves lab bench space. The SYP-8L withdraws samples to rinse the line right before each time interval, individual samples are dispensed simultaneously into collection tubes or vials in the SCR-160L Sample Collector. After collecting the samples, SYP-8L does the media replacement, back flushes the filters, and purges all the sampling lines. The DSC-800D System Controller permits quick and easy programming of all parameters and gives the user total flexibility in the use of up to 2 systems simultaneously. Each system can be programmed to control all dissolution parameters, all test method are printed by provided printer.


Specification :





LOGAN SYSTEM 860CDL Automated Dissolution Sampling Systems




12 Position 3 Speed Zone Air Bath Dissolution Sampling Camera System

Features

  • Three speed zones for 3 groups of 4 spindles, each zone may have different speeds
  • In shaft cameras to record the sample dissolving in baskets
The Logan System 860D-12CDL Automated Dissolution Testing & Sampling System with cameras is a modularly designed dissolution testing & sampling system. The integral UDT-816 D-12 AIRBATH Dissolution Tester can be configured with 3 speed control zones, comprising o f 12 vessels and spindles. It can be operated at one speed for all 12 spindles, or 2 speed zone s for 8 spindles and 4 spindles, or 3 speed zones for 3 groups of 4 spindles. The 2 and 3 zone speeds may be different. UDT-816D-12 has 12 cameras under the vessels, allowing one to visualize and record how the tablets are dissolving. For USP I method, the camera is inserted into the basket shaft allowing one to see how tablets are dissolving in each basket. This system is used for dissolution testing of a variety of pharmaceutical products including tablets and capsules. This new unique design with varying speeds during the same run provides an invaluable tool for R&D.

The Tablet Dropping Tray automates the process of tablet dropping. It drops the tablets simultaneously, thereby marking the beginning of each test with far greater precision than the manual method. The automated sampling manifold can be controlled to lower itself into the vessels during sampling. At each sampling point, the syringe pump takes samples from the vessels and flushes out the sampling lines. After flushing the lines, the samples return to the same vessels. This system does not send any samples to waste. The time, speed and temperature will be recorded at the beginning of each test as well as when samples are being taken. The LOGAN SYSTEM 860D-12CDL is designed to save valuable time by delivering precise volumes automatically and reducing the need for analyst intervention, the camera system records the sample dissolution that brings the physical and chemical aspects together.

 The Logan SYSTEM 860D-12CDL includes two SYP-6L-10ML Syringe Pump modules that is builtin with the DSC-800 System Controller and auto-sampler. This combination saves lab bench space. The SYP-6L-10ML withdraws samples to rinse the lines just before each time interval. Individual samples are dispensed simultaneously into collection tubes or vials in the SCR-DL Sample Collector module. After collecting the samples, SYP-6L-10ML replaces the media, back flushes the filters, and purges all the sampling lines.

Specification :



 
 
 
 
PT. SPEKTRA SURYA UTAMA
 
2