Universal Centrifuge


Centrifuge Z 306


The small universal laboratory centrifuge offers a wide range of applications, which covers clinical laboratory requirements,research, as well as industrial laboratory use.
The Z 306 offers many accessories, including rotors for microtitreplates and high-speed fixed angle rotors for reaction vessels or centrifuge tubes up to 50 ml. Additionally, swing out rotors, which hold a volume of 4 x 100 ml can be used for tissue culture tubes and also for all commonblood tubes.
This wide range of accessories makes the Z 306 laboratory centrifuge indespensable in research laboratories and small clinical laboratories.

Specification
  • max. Speed: 14000 rpm
  • max. RCF: 18624 xg
  • max. Volume: 4 x 100 ml
  • Speed range: 200 - 14000 rpm
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 35 cm x 33 cm x 47 cm
  • Weight: 30 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Active imbalance detection and cut-off
  • One-hand closing
  • Motor driven lid lock
  • Automatic rotor identification system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • Air cooling
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10-er
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed opertaion


Centrifuge Z 326


Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.
The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specification
  • max. Speed : 18000 rpm
  • max. RCF: 23542 xg
  • max. Volume: 4 x 100ml
  • Speed range: 200 - 18000 rpm
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 40 cm x 36 cm x 48 cm
  • Weight: 43 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Motor driven lid lock
  • Automatic rotor identification system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • Air cooling
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10-er
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed opertaion


Centrifuge Z 326 K



Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds.
The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40 cm wide.

Specification
  • max. Speed: 18000 rpm
  • max. RCF: 23542 xg
  • max. Volume: 4 x 100ml
  • Speed range: 200 - 18000 rpm
  • Temperaturvorwahl: -20C to 40C
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 40 cm x 36 cm x 70 cm
  • Weight: 60 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Active imbalance detection and cut-off
  • Motor driven lid lock
  • Automatic rotor identifi cation system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • CFC-free refrigeration system (-20 to +40C)
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • Pre-cooling program
  • Standstill cooling
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10 increments
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed opertaion


Centrifuge Z 366



These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.
Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 21379 xg, making these table top centrifuge Z 366 into a universal high-powered centrifuge.

Specification
  • max. Speed: 15000 rpm
  • max. RCF: 21379 xg
  • max. Volume: 6 x 250ml
  • Speed range: 200 - 15000 rpm
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 43 cm x 36 cm x 51 cm
  • Weight: 52 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Motor driven lid lock
  • Automatic rotor identifi cation system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • Air cooling
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10 increments
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed operation


Centrifuge Z 366 K


These universal table top centrifuges Z 366 and Z 366 K putting new scales regarding the versatility, running features, easy handling and design.
Both, the tube capacity of 40 x 15 ml conical tubes and centrifugal forces up to 24325 xg, making these table top centrifuge Z 366 K into a universal high-powered centrifuge.

Specification
  • max. Speed: 16000 rpm
  • max. RCF: 24325 xg
  • max. Volume: 6 x 250ml
  • Speed range: 200 - 16000 rpm
  • Temperature range: -20C to 40C
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 72 cm x 36 cm x 51 cm
  • Weight: 77 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Active imbalance detection and cut-off
  • Motor driven lid lock
  • Automatic rotor identifi cation system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • CFC-free refrigeration system (-20 to +40C)
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • Pre-cooling program
  • Standstill cooling
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10 increments
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed opertaion


Centrifuge Z 446



These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.
If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.
The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

Specification
  • max. Speed: 16000 rpm
  • max. RCF: 24325 xg
  • max. Volume: 4 x 750 ml
  • Speed range: 200 - 16000 rpm
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 54 cm x 39 cm x 67 cm
  • Weight: 79 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Active imbalance detection and cut-off
  • Motor driven lid lock
  • Automatic rotor identifi cation system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed opertaion 
  • Air cooling
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10 increments


Centrifuge Z 446 K


These high-volume centrifuges Z 446 and Z 446 K achieve a throughput of 68 x 15 ml conical tubes or 28 x 50 ml conical tubes at a max.RCF of 3434/4346 xg.
If higher speeds are required, we also offer e.g. an angle rotor with a max. RCF of 14532/16022 xg for 10 x 50 ml.
The fixed-angle and swing-out rotors are suitable for almost all aplications in everyday use in clinical, industrial and research laboratories.

Specification
  • max. Speed: 16000 rpm
  • max. RCF: 26328 xg
  • max. Volume: 4 x 750 ml
  • Speed range: 200 - 16000 rpm
  • Temperature range: -20C bis 40C
  • Running time: 59 min 50 s / 10 s increments, 99 h 59 min / 1 min increments
  • Dimensions (WxHxD): 73 cm x 39 cm x 67 cm
  • Weight: 111 kg
Features and Function
  • Brushless induction drive
  • Microprocessor control
  • Active imbalance detection and cut-off
  • Motor driven lid lock
  • Automatic rotor identifi cation system with over speed protection
  • Audible signal at the end of each run
  • Emergency lid lock
  • Stainless steel chamber
  • CFC-free refrigeration system (-20 to +40C)
  • Autoclavable rotors
Display functions
  • Diagnostic program
  • Program memory for 99 programs
  • Quick-key for short runs
  • Pre-cooling program
  • Standstill cooling
  • 10 acceleration and 10 deceleration rates, possibility of unbreaked deceleration
  • Permanent indication of preset and actual values
  • Pre-selection of speed or RCF in steps of 50/10 increments
  • Pre-selection of running time from 10 sec to 99h 59min or continious
  • Simple one handed opertaion

 
 
 
 
PT. SPEKTRA SURYA UTAMA
 
2