Ultrasonic industrial cleaners
Ultrasonic industrial cleaners with frequency changeover.
Two frequencies (25/45 kHz or 35/130 kHz) can be manually changed over for intensive and gentle cleaning in the TI-H ultrasonic cleaners. Thereby, the first frequency pair (25/45 kHz) is ideally used for cleaning hard surfaces such as metal or glass. For the second frequency pair, oils and greases on hard surfaces can best be cleaned using 35 kHz and sensitive surfaces such as from the jewellery or electronics can best be cleaned using the high frequency of 130 kHz.
Manually welded cleaning baths made of particularly cavitation-resistant special stainless steel ensure long durability of the equipment and enable robust use for different industrial applications.
Industrial parts cleaning "x-tra large".
Not only fine cleaning tasks occur in industry, service and reconditioning cleaning, but the workpieces to be cleaned are often large, heavy and soiled with polishing pastes or oils. The Elmasonic XL machines in 3 sizes (140 to 300 litres usable volume) with overflow pocket and optional skimming equipment and product carriers are suitable here for cleaning heavy and large parts.
The optional heavy-duty oscillation is installed inside the equipment so that the noise insulation folding cover can be closed during operation. Particularly cavitation-resistant oscillation tanks promise a long service life. All machines are equipped with ultrasound from the bottom, ultrasound on 2 or 3 sides and the ultrasound power can be manually set from 10% to 100%. Other functions such as Pulse, Sweep and Degas increase the ultrasound performance, provide better sound distribution or degassing the cleaning bath for new preparation.
Elmasonic X-tra line Flex 1
Ultrasonic cleaning with oscillation.
The modular single cleaning station is designed for industrial use and is available in five sizes (300, 550, 800, 1200 and 1600 litres). Equipped with two design variants: Multi-frequency 25/45 kHz (MF2) or 35/130 kHz (MF3) and an oscillation device for the cleaning basket that supports the cleaning effect of the ultrasound and provides a drain position for the stainless steel basket; the Elmasonic X-tra pro modules are ideal for various cleaning tasks.
Up to 5 user-defined cleaning programs can also be created and called up as well as functions such as Sweep, Pulse and Degas. Other product features such as
ultrasonic bath made of special stainless steel with high cavitation resistance (V4A)
skimming ledge for optional surface run-off of e.g. oils
bottom run-off of cleaned sediments (optional) complete the range.
Elmasonic X-tra line Flex 2
Compact ultrasonic cleaning and rinsing with oscillation.
The compact Elmasonic X-tra Line Flex 2 small machine is ideally suitable for cleaning in the workshop area and for reconditioning cleaning. The Flex 2 unit enables multi-frequency ultrasonic cleaning in the first bath and the rinsing in the second bath. An additional shower increases the scavenging efficiency.
A plug-in precleaning unit provides the possibility to use an Elmasteam steam cleaner. Just like Elmasonic X-tra Line Flex 1, five user-defined programs and the Sweep, Pulse and Degas functions are available.
Thus, manual cleaning is possible efficiently and conveniently in even the most cramped space.