Personal Air Samplers


Personal Air Samplers

Staplex® manufactures a complete line of personal Air Samplers, Calibrators and Filters designed for the professional.

Many models of Personal Air Samplers for fast, accurate sampling results of asbestos, lead and dusts

Primary Electronic Air Flow Calibrators, Rotometers and Primary Bubble Flowmeter for precise Air Sampler calibration

Pre-loaded filter cassettes and filters with guaranteed highest quality control in the industry

All models complete and ready to use

Made in U.S.A. and fully guaranteed by Staplex® - The Air Sampling Specialist
All models available in 110-125 volts AC or 220-240 volts AC, 50-60 Hz


Staplex® PST-2X Personal Air Sampler




For sampling airborne asbestos, lead and other dusts

Made in U.S.A.

This compact personal air sampler weighs only 32 ounces for full-day worker comfort. Samples at flow rates from 0.5 to 2 LPM using 0.8 micron filter cassettes. The built-in flowmeter is calibrated every 0.2 LPM and has a recessed electronic flow control to adjust flow rate. Includes "ON/OFF" switch. Operates 8 hours at maximum flow rate from internal battery pack. Includes plug-in AC charger, durable housing, built-in pulsation dampener, 40" clear flexible tubing with lapel spring clip, heavy-duty belt-clip, and adjusting screwdriver. Suitable for mobile or fixed operation in normal non-explosive atmospheres. Made in U.S.A.

Dimensions: 2-1/4" x 4" x 5-1/4" (5.7 cm x 10.2 cm x 13.3 cm).

Weight: 32 ounces (0.9 kilos).

Model PST-2X Personal Air Sampler Recharge 110-125 volts AC, 50-60 Hz

Model PST-3X Personal Air Sampler Recharge220-240 volts AC, 50-60 Hz


Staplex® PST-5 Personal Air Sampler



For sampling airborne asbestos, lead and dusts
Battery or AC operation
Made in U.S.A.

A durable, easy to use personal air sampler worn by workers in asbestos abatement area. Samples at flow rates from 0.5 LPM to 2 LPM using 0.8 micron filter cassettes. Features built-in flowmeter calibrated every 0.2 LPM and fully adjustable electronic flow control with locking nut, settable over full sampling range. Operates 12 hours at maximum flow rate from internal rechargeable battery pack or continuously with plug-in AC adapter/charger (included). Includes replaceable in-line filter, pulsation dampener, "run" and "charge" indicator lights, 40" clear flexible tubing with lapel spring clip and filter cassette inlet adapter, heavy-duty belt clip, durable case. Suitable for mobile or fixed operation in normal non-explosive atmospheres. Made in U.S.A.

Dimensions: 2-3/4" x 5-/4" x 7-3/8" (7 cm x 13.1 cm x 18.4 cm).

Weight: 44 ounces (1.25 kilos).

Model PST-5 Personal Air Sampler Recharge/run 110-125 volts AC, 50-60 Hz

Model PST-6 Personal Air Sampler Recharge/run 220-240 volts AC, 50-6O Hz



Staplex® PST-5000 Constant Flow Personal Air Sampler




  • Compact, powerful 5-Liter Air Sampling Pump for both High Flow (0.6 to 5 LPM) and Low Flow (5 to 600 cc/min) applications
  • Basic, dependable pump for personal and area air sampling
  • Dual flow range easily handles filters, impingers, cyclones, tubes
  • Rugged construction stands up to everyday use
  • Lightweight, Compact, Easy-to-use
  • Easy keypad entry flow verification
  • One-hour rechargeable, interchangeable battery packs
  • Percent Battery Charge remaining feature puts you in control
  • "Auto-restart" after flow fault, plus "Filter-Off" feature
  • Backlit Display for fast set-up and operation
  • Programmable in three languages: English, Spanish, French
  • Constant Flow Compensation up to 40" water back pressure
  • Built-in Battery Maintenance program
  • Displays: Elapsed Time, Percent Battery Charge remaining, Cumulative Volume Sampled and Flow rate.
  • Made in U.S.A.
The PST-5000 handles personal air sampling for many industrial hygiene, safety, asbestos and lead air sampling applications. Its advanced design, rugged dependability, and powerful operating features give you everything you need in one pump. The PST-5000 combines industry-leading one-hour recharging, interchangeable standard and long run battery packs, built-in battery maintenance program, "Auto-restart" plus "Filter Off" protection after flow fault, intrinsic safety, EMI-RFI protection, and water-dust resistance in a single, compact package. Plus, flow verification is fast and easy with and primary or secondary calibrator. You save time and money while ensuring accurate, efficient sampling. Made in U.S.A.

Dimensions: Model PST-5000 With Standard Battery Pack: 4.5" H x 4" W x 2" D (11.4 cm H x 10.2 cm W x 5 cm D)

Model PST-5003: With Long Run Battery Pack: 5.75" H x 4" W x 2 " D (14.6 cm H x 10.2 cm W x 5 cm D)

Weight: Model PST-5000 With Standard Battery Pack:19 oz. (539 g)

Model PST-5003: With Long Run Battery Pack: 23 oz. (652 g)

PST-5000 Personal Air Sampler with Standard Battery Pack, tubing, filter cassette inlet adapter and lapel clip (charger not included)

PST-5003 same as above with Long Run Battery Pack (instead of Standard)



M-30 Primary Electronic Air Flow Calibrator



Calibrates 100 cc to 30 LPM range using primary standard method with LCD readout
Made in U.S.A.


Calibrates both personal and area air samplers for flow rates up to 30 LPM based on primary standard method. Simply press a button on the durable, impact-resistant flow cell and the electronically calculated flow rate appears on a 4 digit LCD with an accuracy and repeatability of ± 0.5% at any altitude. Operates for up to 8 hours from built-in rechargeable batteries or continuously from a plug-in AC adapter/charger (included). Super compact and portable, the rugged M-30 is ideal for fast and accurate on-site NBS traceable calibration and verification of sampling flow rates. Includes 500 ml bottle of soap film solution and dispenser bottle. Made in U.S.A.

Dimensions: 5-1/2" x 6" x 2-1/2" (14 cm x 15.2 cm x 6.4 cm).

Weight: 32 ounces (.9 kilos).

Model M-3O Air Flow Calibrator Recharge/run 110 volts AC, 50-60 Hz

Model M-30A Air Flow Calibrator Recharge/run 220 volts AC, 50-60 Hz

Optional accessories:

M30-CC Carrying Case for M-30, M-5 or M-1 calibrator, AC adapter/charger, soap film solution and dispenser bottle

SFS500 Soap Film Solution 500 ml bottle



Model M-5 Primary Electronic Air Flow Calibrator



For Personal Air Samplers, range 1 cc to 6000 cc (.001 LPM to 6 LPM), other specifications similar to M-30 (above)

Model M-5 Air Flow Calibrator Recharge/run 110 volts AC, 50-60 Hz

Model M-5A Air Flow Calibrator Recharge/run 220 volts AC, 50-60 Hz

Model M-1 Primary Electronic Air Flow Calibrator

For personal air samplers, range 1 cc to 300 cc, other specifications similar to M-30 (above)
Model M-1 Air Flow Calibrator Recharge/run 110 volts AC, 50-60 Hz
Model M-1A Air Flow Calibrator Recharge/run 220 volts AC, 50-60 Hz



Staplex® Quick Check® Calibrating Rotometers




For economical, fast and accurate calibration of area and personal air samplers
  • Made in U.S.A.
  • Acrylic block flowmeters are a secondary standard method for calibrating personal and area air sampler airflow rates quickly and easily.
  • ± 3% full scale accuracy exceeds current government standards.
Virtually unbreakable components are designed for on-site use. Simply connect Calibrating Rotometer to air sampler with filter cassette in line and read calibrated flow rate on Calibrating Rotometer. Includes flexible tubing and cassette inlet adapter for quick connect to filter cassette. Made in U.S.A.

Dimensions: 6-1/2" x 1-1/8" x 1-1/4" (16.5 cm x 2.9 cm x 3.2 cm).

Weight: 9 ounces (.3 kilos).

RC-5 Quick Check Calibrating Rotometer for personal air samplers,
range 0.4 to 5 LPM graduated every 0.2 LPM

RC-20 Quick Check Calibrating Rotometer for area air samplers,
range 2 to 20 LPM graduated every 1 LPM

RC-50 Quick Check Calibrating Rotometer for area air samplers,
range 4 to 50 LPM graduated every 2 LPM

PBF-2 Primary Bubble Flowmeter for personal air samplers,
range 0 to 2 LPM, includes soap film solution (pictured center)

PBF-1 Primary Bubble Flowmeter for personal air samplers,
range 0 to 50 cc/minute, includes soap film solution (same as pictured center)



Staplex® PST-1DT Detector Tube Personal Air Sampler



  • Ideal for sampling hazardous gases and vapors for NIOSH/OSHA methods
  • Super compact 1.2” x 0.8” x 4.3” (30-mm x 20-mm x 109-mm)
  • Weighs only 4 oz. (114 grams)
  • Flow range 20-200 cc per minute
  • Uses one replaceable 9 volts alkaline or zinc carbon batteries (eliminates charging!)for 40 hours of sampling time
  • Constant flow maintained in 20-150 cc per minute range as battery voltage drops
  • Intrinsically safe
  • Uses 6-mm and 8-mm diameter charcoal tubes and other absorber and colorimetric tubes (6-mm charcoal tube holder included)
  • Special clip ensures sampler stays firmly in pocket
  • Made in U.S.A.
Specifications:

PST-1DT Detector Tube Personal Air Sampler (includes 6-mm charcoal tube holder and 9 volt battery)



 
 
 
 
PT. SPEKTRA SURYA UTAMA
 
2