Data Loggers

Levelogger® Edge - Model 3001

Enhanced Features
  • Titanium based PVD Coating
  • Stores up to 120,000 data points
  • Hastelloy pressure sensor
  • Improved temperature compensation and response time
The Levelogger Edge is a self contained water level datalogger, using infra-red data transfer powered by a 10 year lithium battery, offering the flexibility of installing by use of a Direct Read Cable, wireline or Kevlar cord. The Levelogger Edge has a memory capacity of 40,000 temperature and water level data points, or up to 120,000 using the compression algorithm in linear sampling mode.
Levelogger Software Version 4.0, written to support the Levelogger Edge, Levelogger Junior Edge, LTC Levelogger Junior, Rainlogger Edge, Leveloader and is backwards compatible to support the Levelogger Gold series. Version 4.0 offers many features, including the ability to barometrically compensate multiple Levelogger data files simultaneously.

Barologger Edge - Model 3001

Accurate Barometric Compensation
The Levelogger Edge measures absolute pressure (water pressure + atmospheric pressure) expressed in feet, meters, centimeters, psi, kPa, or bar.

The most accurate method of obtaining changes in water level is to compensate for atmospheric pressure fluctuations using a Barologger Edge, avoiding time lag in the compensation.
The Barologger is set above high water level in one location on site. One Barologger can be used to compensate all Leveloggers in a 20 mile (30 km) radius and/or with every 1000 ft. (300 m) change in elevation.

The Levelogger Software Data Compensation Wizard automatically produces compensated data files using the synchronized data files from the Barologger and Leveloggers on site.
The Barologger Edge uses pressure algorithms based on air rather than water pressure, giving superior accuracy.
The recorded barometric information can also be very useful to help determine barometric lag and/or barometric efficiency of the monitored aquifer.

The Barologger Edge records atmospheric pressure in psi, kPa, or mbar. When compensating submerged Levelogger Edge, Gold or Junior data, Levelogger Software Version 4 can recognize the type of Levelogger and compensate using the same units found in the submerged data file (Levelogger Gold and Junior measure in feet, meters, or centimeters). This makes the Barologger Edge backwards compatible.

Levelogger® Junior Edge -  Model 3001

Cost effective water level & temperature datalogger
Accuracy of 0.1% FS
Increased memory of 40,000
5 year battery
1 year warranty
Compatible with Levelogger Series Software, accessories and Telemetry

For important projects with a tight budget, Levelogger Junior Edge provides a cost-effective solution for continuous water level and temperature measurement. It is simple to program with user-friendly software, and easy to deploy with Direct Read Cables or wireline/Kevlar cord and the Levelogger locking well cap. It features a Hastelloy pressure sensor, battery that lasts 5 years, and memory for 40,000 sets of readings. Accuracy is 0.1% FS with lifetime calibration. Levelogger Junior Edge is SDI-12 compatible, as is the higher accuracy Levelogger Edge.

LTC Levelogger® Junior - Model 3001

LTC Levelogger Junior

Conductivity, Level and Temperature datalogging
Conductivity range
0-80,000 µS/cm
2% accuracy
5-year battery
Memory for 16,000 datapoints

Low Cost Convenience
Compatible with Levelogger Software, accessories, and STS Telemetry Systems
Ideal for salinity and saltwater intrusion studies, tracer tests, agricultural and stormwater run-off monitoring

The LTC Levelogger Junior provides the low cost convenience of three measurement parameters in one instrument. It combines conductivity and temperature sensors, pressure transducer, datalogger, memory for 16,000 sets of readings, and a 5-year battery, in a small waterproof housing. It is compatible with Levelogger Series Software, accessories and STS Telemetry Systems. Ideal for salinity studies and a general indication of contamination levels.

Rainlogger Edge - Model 3002

Add rainfall data to your monitoring network
Compatible with Solinst STS Telemetry Systems
Designed to be used with most tipping-bucket rain guages
The Rainlogger is designed to record the tips of a standard tipping-bucket rain gauge with a reed switch output. Compact and waterproof, this durable field unit offers long-term reliability with a battery that lasts up to 10 years. The event time stamp and total rainfall per time period is logged in non-volatile memory, which holds up to 60,000 readings. Sampling is event based, as the Rainlogger records and saves each tip of the tipping-bucket as it happens.
Compatible with Levelogger Software and Solinst Telemetry Systems, Rainloggers are excellent for measuring local precipitation, larger scale remote monitoring of watersheds and localized stormwater event monitoring. Levelogger customers can now add precipitation data to their water level monitoring networks.
Model 3001 Levelogger App Interface
Connect Wirelessly to Solinst Leveloggers
Program and download data using your smart iOS 7 device.
Email data from the field
Convenient for any application
The Levelogger App Interface uses wireless Bluetooth® technology to communicate to your iOS 7 smart device. Use our Levelogger App Interface and a Solinst Direct Read Cable, to communicate to a downhole Levelogger and email data files right from the field.

Model 3001 Leveloader Gold

1.39 million datapoints or 50 Levelogger Edge files
Start/stop and reprogram Leveloggers in the field
Real-time view option

Solinst Leveloader Gold is a field ready, water resistant handheld data transfer unit. Built for use with the Levelogger series of water level dataloggers.
FEATURES: Real Time View (ideal for pump tests); scroll through data; Levelogger Setup File integration; robust memory; long battery life (uses 9V alkaline or lithium); large LCD screen; ergonomic design; standard connections for USB; RS232; optical and direct read interface cables.
Using Levelogger Setup Files allows the user to setup Levelogger sampling schedules at the office, and store up to 10 of them to the Leveloader.