Water Sampller


Ruttner Water Sampler 1 L



Application:

The KC Water sampler is based on the Ruttner design. The KC Water sampler is suitable for taking samples in lakes, water borings, wells, etc.

Thermometer:

Internal thermometer (non-mercury) for registration of the in-situ temperature. Temperature range between -10 and +60 C. For the 1,7 L Ruttner the thermometer is scaled 0 - 50 C

Technical specifications:

- Volume: 1,0 L
- Cylinder tube, acrylic, O.D./I.D: 8,5/8,0 cm
- Length of tube: 26 cm
- Total height: 56 cm
- Internal thermometer, (non-mercury). Range: -10 C to +60 C
- Drop messenger, brass: 200 g (11.003)
- Recommended line: Max. 2 or 3 mm
- Weight: 1,35 kg




Ruttner Water Sampler




Application:
The KC Water sampler is based on the Ruttner design. The KC Water sampler is suitable for taking samples in lakes, water borings, wells, etc.

Thermometer:
Internal thermometer (non-mercury) for registration of the in-situ temperature. Temperature range between -10 and +60 C. For the 1,7 L Ruttner the thermometer is scaled 0 - 50 C.

Ordering no.

11.001 - (1.0 L) Drop messenger is included.
11.002 - (1,7 L) Drop messenger is included.
11.003 - (3,0 L) Drop messenger is included.
11.004 - (5,0 L) Drop messenger is included.

Specification :





Van Dorn water sampler





General:

The horizontal Van Dorn water sampler is intended for taking water samples near the bottom in lakes, streams, or in stratified water bodies. The water sampler is based on the Van Dorn design.

The sampler is made of a sturdy transparent acrylic tube and has a double releaser, activated by a drop messenger. The release system is manufactured from AISI 316 stainless steel.

Thermometer:

The water sampler comes with a standard, non-mercury thermometer, with a temperature range between - 10 and + 60 degrees oC (1 degree indications on the scale).

When the 2 rubber end covers are released, they are held together by a rubber strap.

NEW:
All Van Dorn models have been re-designed for better performance and now the steering fins are integrated into the sampler, ensuring a better stabilization in flowing water.

Available sizes:

The water sampler comes in 3 sizes, 2 - 3 or 5 L. All samplers are equipped with integrated direction fins for stabilization in flowing water.

11.100 - Van Dorn 2,0 litres
11.200 - Van Dorn 3,0 litres
11.300 - Van Dorn 5,0 litres


Drop messenger:

Brass, 500 g, is included. used on a 5mm line.

Lines:

Polyester lines, 5 mm can be supplied as unmarked line or marked each meter. Please see our section for lines and handwinches.






Small Stainless steel water sampler




The water sampler is made of AISI 316 stainless steel with an outer diameter of 54 mm. Finish: Electro polish.

On top of the water sampler a rubber bung with 10 metres of 5 mm rope is mounted.

Custom made Nylon lines with markers and various lengths can be made upon request see Hand winches and lines.

Stainless Steel water sampler:

The water sampler shown from the top, before deployment ensure the rubber bung is pressed down in the top part of the sampler, once the wished depth have been reached, you yank the line, and the rubber bung will open up, and your water sample will be taken. Recommended for a max. depth of 20 m.

Description :

Small stainless steel water sampler, 0,5 l ; Length/Weight : 33 cm/1 kg ; Ordering No. 11.210

Small stainless steel water sampler, 1,0 l; Length/Weight : 58 cm ; Ordering No. 11.211

Small stainless steel water sample
r, 1,5 l; Length/Weight : 83 cm ; Ordering No. 11.212




Integrated Water sampler



Application:

Collecting vertical water samples of 2 meters height.

General:

Integrated water sampler, tube 40 mm x 100 cm, (polycarbonate), sample volume 2 litre.

Inclusive 10 metres of 5 mm polyester line, marked with figures each meter

Extension:

The tubes are connected with a POM coupling device equipped with O-rings inside. The closing bung is made of AISI 316 stainless steel. The coupling device can also be secured by use of 2 extra O-rings

10.240 - Transport box for water samplers. Made from PE/HD (Polyethylene).
12 x 116 cm (for model 10.200)

10.290 - Locking mechanism for the line

10.280 - On the bottom there is a ring where an additional weight of app. 1 kilo can be attached if used in streamy water


Description :







Niskin Water Sampler 1.7 to 12 litre




Niskin Water Sampler:

The water sampler is fully made of PVC and its interior is totally free from metal parts. Top- and bottom plates are held together with a sea water resistant rubber string, and a drop messenger releases the closing mechanism.

The KC water sampler can be used singly (by use of 1 pc 60.002 Centre hanger for single ocean water sampler) or in series and closes correspondingly. The Niskin water bottles are also available in a special version, (61.xxx series) which can only be used with our Rosette and Racks system.

Drop messengers:

Standard delivery for Niskin water bottles is a 400 g drop messenger. If you want to use a centre hanger you must use an 800 g drop messenger, model 60.004.

60.002 Centre Hanger:

KC Centre hanger is used for deploying Niskin bottles for single use on a wire (6 mm), our standard bottles ranging from 1,7 liters to 12 liters (60.xxx series) all able to be used on the centre hanger, to release the Niskin bottle an 800g drop messenger is used.

KC-Denmark also manufactures a large range of rack's as well as rosette stations for Niskin water samplers, this includes various racks from 2 bottles up to 6, 12 and 24 systems





Limnos Water sampler 2 L.



Application:

The  10.600 Limnos water sampler is designed as a free-flow design for vertical operations; the sampler is constructed from AISI 316 stainless steel, POM and the sample tube is made out of acrylic. The base footprint of the sampler has an area of 210 x 190 mm, and make it easy to operate on the deck of a boat.

Thermometer:

Internal thermometer (non-mercury) for registration of the in situ temperature. Temperature range between -10 and +60 C.

Technical specifications:

Ordering no.: 10.600
Contents: 2 L
Weight: 4,4 kg incl. drop messenger
Footprint: 210 x 190 mm
Height: 680 mm



Water and pore fluid samplers


sampler for 12 bottles 50 ml



General:

This is a new model multi water sampler with 12 pcs 50 ml syringes. The model can operate on 6000 meter depth.
Operating voltage is between 12 and 24 Volt DC. Every time the motor gets a pulse it will release one syringe. As option a time lapsed trigger can be attched. The motor is pressure compensated for 6000 m depth.

The multi water sampler can be used on landers for taking samples from seabed or incubator chambers or placed on a ROV for taking samples over oil pipelines.

Dimensions:

Outer diameter: 340 mm
Height: 300 mm
The syringes are made of nylon PA 6.6
Weight:
Weight in air: 8,3 kg
Weight in water: 5,5 kg

This model is manufactured from 2 mm AISI 316 stainless steel, finish: Electro polish.


Sampler for 24 bottles 100 ml




Application:

The multi water sampler can be used on lander systems for taking samples from seabed or incubator chambers or placed on a ROV for taking samples over oil pipelines.

Capacity:
24 x 100 ml

Triggering:
Manual or time lapsed triggering.

Interface:

USB or RS-485. (To be specified upon ordering).

Power supply:
12 or 24 VDC

Cables:
Standard delivery exclusive battery box and cables.

General:
The sampler is manufactured from AISI 316 stainless steel, finish: Electro polish.

Operating depth:
6000 m

Multi water sampler
  • Volume: 24 x 100 ml,
  • Syringes: Nylon PA 6.6
  • AISI 316 stainless steel.
  • Programmable trigger can be mounted. (Optional).
  • Interface available: RS-485 or USB
  • Operational depth: Up to 6000 m.
  • Power supply: 12 or 24 VDC
  • Finish: Electro polish
  • Weight 28 kg
  • Comes without cables, trigger, battery box, etc
A complete system requires the following items:

100.210 - The multi water sampler
60.010 - Time lapsed trigger (USB or RS-485 interface)
100.217 - Battery box
100.235 - Battery charger
100.230 - Cable
100.234 - Plug for programming


Sampler for 36 bottles 500 ml




Multiple water sampler for 6000 m


  • Room for 36 pcs of 500 ml syringes
  • Power supply: 24 VDC
  • Programmable trigger for individual releases between 1 minute and 1045 hours.
  • Interface for USB or RS-485
  • Diameter: 132 cm
  • Height: 116 cm
  • Weight: 275 kg

Syringe
  • Contents: 500 ml
  • Acryllic and AISI 316 stainless steel
  • Luer lock

 
 
 
 
PT. SPEKTRA SURYA UTAMA
 
2