Flue Gas Analyzer - IMR 1400


COMBUSTION GAS ANALYZER
IMR 1400 C





has been designed to measure flue gases :
  • Boiler 
  • Burner 
  • Engine
has been developed to meet  the customers need and  to fulfill special applications.
is a high quality combustion gas analyzer using the latest sensor technology
is easy to use and will measure  all the important parameters to adjust/ optimize the combustion process

Features :
  • Portable and very compact combustion gas analyzer housed in a rugged aluminum case
  • Calculates: CO2, Combustion Efficiency/Losses, Excess Air/Lambda
  • Automatic zero calibration
  • Integrated self check program
  • Unit selection : ppm - mg - mg(ref O2) mg/kWh
  • Gas sampling probe E length 0.8 ft (250mm) , hose 8 ft (2.5m)
  • Rechargeable battery
  • Power supply 110VAC/60Hz or 230VAC/50Hz
Standard features: Rugged Case, Pump, Battery Charger, Probe with Condensation Trap, ppm/mg Ref O2

Specification :









COMBUSTION GAS ANALYZER
IMR 1400 CP




Features :
  • Portable and very compact combustion gas analyzer housed in a rugged aluminum case
  • Calculates: CO2, Combustion Efficiency/Losses, Excess Air/Lambda
  • Automatic zero calibration
  • Integrated self check program
  • Unit selection : ppm - mg - mg(ref O2) mg/kWh
  • Gas sampling probe E length 0.8 ft (250mm) , hose 8 ft (2.5m)
  • Rechargeable battery
  • Printer
  • Power supply 110VAC/60Hz or 230VAC/50Hz
Standard features: Printer, Rugged Case, Pump, Battery Charger, Probe, ith Condensation Trap, ppm/mg Ref O2






COMBUSTION GAS ANALYZER
IMR 1400P/PL




Portable, continuous measuring flue gas analysis instrument housed in an aluminum case for measuring air temperature, flue gas temperature, Oxygen O2, Carbon monoxide CO (H2 comp.), Nitric oxide NO, Nitric dioxide NO2, Sulfur dioxide SO2, Hydrocarbon HC, losses, excess air, combustion efficiency, draft, Carbon dioxide CO2 and soot. Simultaneous display of eight measured parameters on the illuminated LCD. Integrated thermal printer and RS232 interface. Measurement printout or service printout, both include date,time and fuel type. ppm,mg,mg/kWh,mg(ref.O2) units are selectable. Automatic and manual CO-bypass. 
Memory for 220 measurements. Case has additional space for spare parts.

Standard Equipment:
  • Illuminated display with simultaneous display of 8 measured variables
  • Languages: D, UK, F, USA, E, TR, etc.
  • 7 programmed and 5 programmable fuels
  • Measurement display is switchable between ppm, mg, mg(O2) and mg/kwh
  • Battery status is shown on the measurement display
  • Interface RS 232
  • Printout of all measured and calculated parameters
  • Electronic controlled soot measurement
  • Automatic and manual CO overflow shut-off
  • Automatic zero calibration within 3 minutes. Recalibration within 30 sec.
  • Integrated self check program for all functions and parameters.
  • After 1000 operating hours a "Service needed" note appears on the display.
  • Gas sampling probe, length 10.5" (270mm),NiCrNi, flexible hose 11.5 ft. (3,5m)
  • Combustion air probe, length 5" (130mm), line 11.5 ft. (3,5m)
  • Condensation trap with integrated filter
  • Operating temperature 50F..104F (10C..40C)
Standard features: Printer, Rugged Case, Pump, Battery Charger, Measurement Memory, Probe with Condensation Trap, ppm/mg Ref O2, Soot, Draft, 12VDC Charging, RS232

Specification :




COMBUSTION GAS ANALYZER
IMR 1400 PS





Specification :











 
 
 
 
PT. SPEKTRA SURYA UTAMA
 
2